Allied Telesis AT-S94 - Manual (Page 112)

Page 112
Allied Telesis
AT-S94 Management Software Web Browser Interface User’s Guide
3. Click Modify. The Port Trunking Configuration Page opens:
Figure 68: Port Trunking Configuration Page
In addition to the fields in the The Port Trunking Page, the Port Trunking Configuration Page contains the following
additional field:
• Unit Number — Displays the stacking member for which the port trunking parameters are defined.
• LACP — Indicates if LACP is enabled on the trunk. The possible field values are:
– Checked — Enables LACP on the trunk.
– Unchecked — Disables LACP on the trunk. This is the default value.
4. Modify the Trunk, LACP, Unit Number, and Trunk Name fields.
5. Select the ports for the trunk from the Port List using the arrow. The selected ports are displayed as
Trunk Members.
6. Click Apply. Trunking information is modified and the device is updated.
7. Click Save Config in the Trunk Settings Page menu to permanently save the changes.