Allied Telesis AT-S94 User Manual
Page 120
Page 120
Allied Telesis
AT-S94 Management Software Web Browser Interface User’s Guide
The second section contains a table that maps VLAN parameters to ports.
•
Select the interfaces displayed in the table.
–
Ports of Unit — Specifies the port and stacking member for which the VLAN mapping is displayed.
–
Trunks — Specifies the trunk for which the VLAN mapping is displayed.
•
Interface Status — Indicates the interface’s membership status in the VLAN. The possible field values are:
–
Tagged — Indicates the interface is a tagged member of a VLAN. All packets forwarded by the interface
are tagged. The packets contain VLAN information.
–
Untagged — Indicates the interface is an untagged VLAN member. Packets forwarded by the interface
are untagged. In the default VLAN, this is the default value for all interfaces.
–
Excluded — Indicates that the port is excluded from the VLAN.
–
Forbidden — Indicates that the port cannot be included in the VLAN.
2.
Click the Add button. The Add VLAN Page opens:
Figure 75: Add VLAN Page
3.
Define the fields.
4.
Click Apply. The VLAN is created, and the device is updated.
To modify VLAN settings:
1.
Click Layer 2 > VLAN. The VLAN Page opens:
2.
Select a VLAN from the table.