Allied Telesis AT-S94 - Manual (Page 117)

Configuring Interfaces
Page 117
Note
When viewed, the information also includes the Type of the address: static or dynamic.
4. Click Apply. The new MAC address is added to the addresses table and the device information is updated.
To delete all MAC addresses:
1. Click Layer 2 > MAC Address. The MAC Address Page opens.
2. Click Delete in the Delete All MAC Addresses section of the MAC Address Page. All addresses are cleared
from the Dynamic MAC Address Table and the device begins to learn new addresses as packets arrive on
the ports.
To view or remove static MAC addresses:
1. Click Layer 2 > MAC Address. The MAC Address Page opens.
2. Click View. Depending on whether View Static or View Dynamic is chosen, the View Static MAC Address
Table Page or View Dynamic MAC Address Table Page opens:
Figure 73: View Static MAC Address Table Page
The View Static MAC Address Table Page and or View Dynamic MAC Address Table Page display all static or
dynamic MAC addresses, respectively.
3. Click the radio button to select a VLAN ID.
4. Click Delete. The MAC Address is deleted from the list (applicable to Static addresses only).
5. Click Refresh. The MAC Address information is updated.
6. Click Close. The MAC Address Page is displayed.