Allied Telesis AT-S94 - Manual (Page 119)

Configuring Interfaces
Configuring VLANs
Page 119
Defining VLAN Properties
The VLAN Page provides information and global parameters for configuring and working with VLANs.
To configure a VLAN:
1. Click Layer 2 > VLAN. The VLAN Page opens:
Figure 74: VLAN Page
The VLAN Page is divided into two sections. The first section contains the following fields:
• VLAN ID — Defines the VLAN ID. Possible VLAN IDs are 1-4095, in which “1” is reserved for the default
VLAN, and “4095” is reserved as the “discard” VLAN.
• VLAN Name — Displays the user-defined VLAN name.
• VLAN Type — Displays the VLAN type. The possible field values are:
– Dynamic — Indicates the VLAN was dynamically created through GARP.
– Static — Indicates the VLAN is user-defined.
– Default — Indicates the VLAN is the default VLAN.
• 802.1x Authentication — Enables the 802.1x authentication method on the VLAN. The possible field
values are:
– Enable — Enables 802.1x authentication.
– Disable — Disables 802.1x authentication. This is the default value.
• Delete VLAN — Removes the specified VLAN. The possible field values are:
– Checked — Deletes the specified VLAN.
– Unchecked — Maintains the specified VLAN.