Allied Telesis AT-TQ3600 - Manual (Page 55)

AT-TQ3600 Wireless Access Point Installation Guide
55
Setting the Country Setting
You should set the country setting during the initial management session
of the access point to ensure that the device operates in compliance with
the codes and regulations of your region or country.
Note
The non-US model of this product has a country code setting that
must be set during the initial management session of the unit. The
setting ensures that the unit operates in compliance with the laws
and regulations of your country or region.
For the US model the country code is preset and cannot be
changed. Per FCC regulations, the country code setting for all WiFi
products marketed in the US must be fixed to US operational
channels only.
To set the country setting, perform the following procedure:
1. Select Wireless Settings from the Manage menu.
The access point displays the Modify wireless settings window, shown
in Figure 27.
Figure 27. Modify Wireless Settings Window
2. Select the Country pull-down menu and select your country or region.