Samsung SM-T537AYKAATT - Manual (Page 126)

121
• Network operators: Using this feature you can view the
current network connection. You can also scan and select a
network operator manually, or set the network selection to
Automatic. The current network connection displays at the
bottom of the list.
Important! You must deactivate data service prior to searching
for an available network.
Note: Connecting to 3G networks slows the data transfer
speed and time.
Default Setup Options
Your phone default is set to Automatic, which causes your
phone to automatically search for an available network.
To select a network each time you connect, set this option to
Manual:
1. From the Settings screen, touch Connections ➔
More networks ➔ Mobile networks.
2. Touch Network operators.
3. Touch Default setup.
4. Touch Manual to locate and connect to a network
manually or touch Automatic to allow the device to
automatically select a network.
AT&T MicroCell
To search for an AT&T MicroCell:
1. From the Settings screen, touch Connections ➔
More networks ➔ Mobile networks.
2. Touch Network operators.
3. Touch Search for AT&T MicroCell.
Your AT&T MicroCell must be installed and activated before
you can connect to it.
For more information, visit att.com/esupport .