Samsung ML-6512ND-XAA - Manual (Page 59)

Printing_ 59
1. From your Mac application, select Print from the File menu.
2. Select Layout from the drop-down list under Orientation.
3. Select a binding orientation from Two Sided Printing option.
4. Select the other options you want to use.
5. Click Print, then the machine prints the selected number of pages on a
side of a paper.
If you print more than 2 copies, the last page of the first copy and the
first page of the second copy might print on same sheet of paper.
Avoid using this feature when you are printing more than 1 copy.
LINUX PRINTING
Some features may not be available depending on models or options.
It means that the features are not supported.
Printing from applications
The following windows may differ, depending on your operating sys-
tem, printer models or the application you are using.
There are a lot of Linux applications that allow you to print using Common
UNIX Printing System (CUPS). You can print on your machine from any
such application.
1. Open an application, and select Print from the File menu
2. Select Print directly using lpr.
3. In the LPR GUI window, select the model name of your machine from
the printer list and click Properties.
4. Change the print job properties using the following four tabs displayed at
the top of the window.
• General: This option allows you to change the paper size, the paper
type and the orientation of the documents. It enables the duplex fea-
ture, adds start and end banners and changes the number of pages
per sheet.
Automatic/manual duplex printing may not be available
depending on models. You can alternatively use the lpr printing
system or other applications for odd-even printing.
• Text: This option allows you to specify the page margins and set the
text options, such as spacing or columns.
• Graphics: This option allows you to set image options that are used
when printing image files, such as color options, image size, or
image position.
• Advanced: This option allows you to set the print resolution, paper
source and special print features.
5. Click Apply to apply the changes and close the Properties window.
6. Click OK in the LPR GUI window to start printing.
7. The Printing window appears, allowing you to monitor the status of your
print job.
To abort the current job, click Cancel.
Printing files
You can print many different types of files on your machine using the stan-
dard CUPS way, directly from the command line interface. The CUPS lpr
utility allows you to do that. But the drivers package replaces the standard
lpr tool by a much more user-friendly LPR GUI program.
To print any document file:
1. Type lpr from the Linux shell command line and press
Enter. The LPR GUI window appears.
When you type only lpr and press Enter, the Select file(s) to print win-
dow appears first. Just select any files you want to print and click Open.
2. In the LPR GUI window, select your machine from the list, and change
the print job properties.
3. Click OK to start printing.
Configuring Printer Properties
Using the Printer Properties window provided by the Printers configura-
tion, you can change the various properties for your machine as a printer.
1. Open the Unified Driver Configurator.
If necessary, switch to Printers configuration.