Samsung SGH-I897ZKZATT - Manual (Page 106)

101
phone becomes invisible again.
Visible time-out
Visible time-out option allows you to make your device visible for
a certain time limit and become invisible. This option can only be
accessed when your device is set to Visible.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Visible time-out.
2. Tap 2 Minutes, 5 Minutes, 1 Hour, or Never.
Scan Devices
This option allows you to scan for active Bluetooth devices so you
can pair with them.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Bluetooth settings and tap Scan devices.
Your phone begins scanning and lists any discovered
devices in the Bluetooth devices section.
2. Tap a device name to pair with the device.
Important!: Some Bluetooth devices are secured and require a PIN number to
confirm and pair with them.
3. Enter a PIN to pair with the device, if one is required, and
tap OK.
Tethering & portable hotspot
This option allows you to share your phones’s mobile data
connection via USB or as a portable Wi-Fi hotspot.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Tethering and portable hotspot.
2. Tap USB tethering to add a checkmark and activate the
feature.
Mobile AP
You can use your phone as an Internet AP (Access Point) using
Mobile AP. This allows other devices (maximum of 5) to connect
to it via Wi-Fi. The Internet will be available on connected devices
to share your 3G network.
Important!: A Tethering/Mobile Hotspot is required to use this service. Please
go to www.att.com/myWireless or dial 611 if you do not already
have this service provisioned.
To set up Mobile AP, follow these steps:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Tethering and portable hotspot ➔ Mobile AP
settings ➔ Mobile AP.
2. Tap Mobile AP to make a checkmark and activate the
feature.