Campbell Scientific AP200 CO2/H2O Atmospheric Profile System - Manual (Page 45)

AP200 CO
2
/H
2
O Atmospheric Profile System
FIGURE 5-17. Proper wiring of power cable onto DIN bus of AP200
system enclosure
To relieve strain on the AP200 cables, use a cable tie to secure the cables to the
cable-tie loop on the pump module as shown in FIGURE 5-18.
FIGURE 5-18. Power cables secured to cable tie loop on pump module
of AP200 enclosure
Replace the cap on the AP200 enclosure feedthrough. Gently bend the cables
back while sliding the cap on and rotating the cap to minimize the space around
the cables as shown in FIGURE 5-19. Tighten the thumbscrew to secure it.
33