Flytec 6030 * - Manual (Page 8)

Flytec 6030-GPS
8 / 62
By using the keys ▲ and ▼ it is possible to select an individual WP and to alter it after
pressing the OK key.
The 1st letter of the WP name shall be flashing, again by using the ▲and ▼ keys the
required letter is selected; numbers, letters as well as a range of special characters are
available. By pressing the ► key the cursor moves to the next letter position etc. In this mode
the F1 key is used to switch between capitals and minuscule.
The F2 key is used to rub out one character. It is possible to enter max. 17 characters.
When the name has been entered completely, confirm by pressing OK.
1.4 Menu Sequence
Main Menu
Flight memory
Waypoints
Routes
Airspace
User Settings
Variometer
Basic filter
Digital Vario Integrator
Threshold last Climb
Specific Day Climb
Variometer Acoustics
Acoustic settings
Threshold ascent acoustic
Threshold Sinktones
Speed
Speed mode
Sensor setting Pitot
Sensor setting wind vane
Stall Speed
TEC Total Energy Compens.
Flight Memory
Recording Auto/Man
Recording interval
McCready
Polar Curves
Pilot’s name
Type of aircraft
Aircraft ID
Manage Memory
Delete all flights
Delete all WP&Routes
Delete all Airspace data
Formatting the Memory
Simulation
Instrument Settings
Display contrast
Language
Battery type
Time zone
Units
Coordinate format
Bluetooth
SMS
Additional Software package
Package 00
Airspace (max 20) 01
Airspace (max 300) 02
Bluetooth SMS 03
Package 04
Package 05
Package 06
Package 07 - Factory settings