Flytec 6030 * - Manual (Page 42)

Flytec 6030-GPS
42 / 62
4.2.1 Flight instrument Options
All settings can be set or changed comfortably with the Flychart 4.52.
4.2.2 Waypoints
and Routes
In Flychart the Waypoints and Routes may be transferred to the instrument within the same
Menu. Flychart is also appropriate to import waypoint files from SeeYou or CompeGPS
or Garmin for transfer to the instrument.
4.2.3 Airspace
(CTR)
The same principle applies on Airspace. For this purpose please activate button „Airspace“.
4.3 Transferring new Software to the FLYTEC 6030 GPS
As is the case with many other present-day instruments, there is also the possibility to
up-date the software version. Hereby future requirements presented by pilots or new
Competition regulations may be rapidly implemented. The manufacturer Flytec
shall post from time to time program up-dates of the FLYTEC 6030 GPS firmware on its
internet homepage, which can be downloaded by the user free of charge for storage and
subsequent transfer to the FLYTEC 6030 GPS.
In order to be able to write to the FLYTEC 6030 GPS flash memory with a PC, it is necessary
to use a program (tool) which is available in zipped format file with the name of “Flash-
6030.zip”
(approx. 1 MB). In addition, also the intrinsic firmware to be uploaded has to be obtained
from the homepage. Its name is e.g. “6030V214.moc” (approx. 500 KB) which is equivalent
to version 2.14.
We recommend to store all the related files in one single subdirectory. After decompressing
the ZIP file a number of files are created. Double clicking on the file “upload.exe” starts the
User settings and
Instrument settings
Waypoints
Airspace CTR