Videotec ULISSE COMPACT - Manual (Page 67)

Instruc
tions manual - English - EN
67 MNVCUCZ_1351_EN
15.4 Communications
Configuration through OSD
Half-duplex serial RS485 interface, full-duplex RS422
and daisy-chain architecture
Firmware updating from console in remote mode
(only VIDEOTEC MACRO and PELCO D protocols)
Up to 1023 units, addressable by means of dip-
switches
ULISSE COMPACT, IP based control mode:
- Connection Ethernet port LAN 10/100T
15.5 Protocols
AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO
D, VIDEOTEC MACRO
AMERICAN DYNAMICS, ERNITEC, PANASONIC, PELCO are registered
trademarks.
The product may be interfaced with devices not manufactured by
VIDEOTEC. It is possible that the interface protocols have changed or
are in a different configuration from earlier tested units by VIDEOTEC.
VIDEOTEC recommends a test prior to installation. VIDEOTEC will
not be liable for any installation costs or lost revenues in the event a
compatibility problem will occur.
ULISSE COMPACT, IP based control mode:
- Compression H.264/AVC and JPEG
- Two independent video streams
- Image resolution: from Full D1 (720x576 for PAL,
720x480 for NTSC) to 352x240 in 18 steps
- Web Server
15.6 Environment
Indoor/Outdoor
Operating temperatures (with heater): From -40°C
(-40°F) to +60°C (140°F)
Wind resistance
- Operational: up to 160km/h
- Stationary: Up to 210km/h
Surge immunity: Up to 2kV (line to line),up to 4kV
(line to earth, Class 4)
15.7 Certifications
CE: EN60950-1, EN61000-6-3, EN50130-4
FCC Part 15, Class B
EN60529 IP66
cULus Listed, NEMA 4X
- Version with white light LED illuminator excluded
- Version with IP control mode, pending