Videotec ULISSE COMPACT - Manual (Page 39)

Instruc
tions manual - English - EN
39 MNVCUCZ_1351_EN
9.1.10.2 Manual Control Menu (Limits)
Once inside the menu it is possibile to set the
following parameters:
1. Pan Limits: Enables the limits of Pan.
2. Pan Start: Sets the start limit of Pan.
3. Pan End: Sets the end limit of Pan.
4. Tilt Limits: Enables the limits of Tilt.
5. Tilt Start: Sets the start limit of Tilt.
6. Tilt End: Sets the end limit of Tilt.
LIMITS
------------------------
1>PAN LIMITS : N
2 PAN START : + 0.00
3 PAN END : + 0.00
4 TILT LIMITD : N
5 TILT START : + 0.00
6 TILT END : + 0.00
Fig. 71
9.1.10.3 Preset Menu
1. Edit Preset: Allows access to Edit Preset menu.
2. Utilities Configuration: Allows access to
Utilities Configuration menu.
PRESET
------------------------
1>EDIT PRESET >
2 PRESET UTILITIES >
Fig. 72
9.1.10.4 Preset Menu (Edit Preset)
Once inside the menu it is possibile to set the
following parameters:
1. Number: The Preset number to be edited.
2. Enabling: Enabling preset.
3. Pan: Pan position in degrees.
4. Tilt: Tilt position in degrees.
5. Zoom: Zoom position.
6. Focus: Daytime and night-time position of the
focus.
7. Speed: The speed at which the position is
reached when preset is recalled from the Patrol
and Scan function.
8. Pause: Sets the dwell time in seconds before
starting the next movement in Patrol.
9. Text: The text that is displayed when the preset
position is reached.
EDIT PRESET
------------------------
1>NR. : 1
2 ON : N
3 PAN :+ 0.00
4 TILT :+ 0.00
5 ZOOM : 0
6 FOCUS: 4096 - 5600
7 SPEED: 100.0
8 PAUSE: 1
9 TEXT : Text 001
Fig. 73
From the menu it is possible to directly store the
preset by sending the Iris Close command that
enables the pan & tilt movements.