Videotec ULISSE COMPACT - Manual (Page 38)

EN - English - I
nstruc
tions manual
38 MNVCUCZ_1351_EN
9.1.10 Movement Menu
1. Configuration: Sets one of the default
configurations of the pan & tilt.
• Standard: Sets the standard movement
speed.
2. Offset Pan: The pan & tilt has a mechanically
defined 0° position. The Offset Pan function
allows the definition of a different 0° position
using software.
3. Manual Control: To access the submenus
operating the parameters associated with the
manual movements of the device.
4. Preset: To access the submenus used to to edit
Preset values.
5. Patrol: To access the submenus used to edit
Patrol values.
6. Autopan: To access the submenus used to edit
Autopan values.
7. Motions Recall: To access the submenu which
manages automatic load of the movements.
8. Advanced: Allows access to the advanced
settings submenu.
MOTION
------------------------
1>CONFIG. : STANDARD
2 OFFSET PAN: + 0.00
3 MANUAL CONTROL >
4 PRESET >
5 PATROL >
6 AUTOPAN >
7 MOTIONS RECALL >
8 ADVANCED >
Fig. 69
9.1.10.1 Manual Control Menu
1. Maximum Speed: Sets the maximum manual
speed.
2. Fast Mode: Enables the Fast mode. When
enabled, this option is used to move fastly the
pan & tilt by moving the joystick to the limit
stop.
3. Speed With Zoom: Enables the option Speed
with Zoom. When enabled, this parameter
automatically slows down the Pan & Tilt speed,
based on the Zoom factor.
4. Tilt factor: Sets the reduction factor of the tilt
axis manual speed.
5. Autoflip: Enables the autoflip function (i.e.
when the tilt reaches the end of the stroke, it
automatically rotates the pan & tilt by 180°),
making it easier to follow the objects along
corridors or roads.
6. Movement Limits: To access the Limits menu.
MANUAL CONTROL
------------------------
1>MAXIMUM SPEED :100.0
2 FAST MODE : Y
3 VEL. WITH ZOOM : N
4 TILT SCALE FACT.: 2
5 AUTOFLIP : Y
6 MOVEMENT LIMITS >
Fig. 70