Videotec ULISSE COMPACT - Manual (Page 66)

EN - English - I
nstruc
tions manual
66 MNVCUCZ_1351_EN
15 Technical data
The installation is type TNV-1, do not
connect it to SELV circuits.
In order to reduce the risk of fire, only use
cable sizes greater than or equal to 26AWG
(0.13mm²).
15.1 General
Constructed from aluminium and tecnopolymer
Epoxypolyester powder painting, RAL9002 colour
Easy installation thanks to the self-centring connector
Zero backlash
Quick configuration and setup
Dynamic positioning control system
15.2 Mechanical
Cable glands: 2xM16, 2xM12
Horizontal rotation: continuous
Vertical rotation: From -90° to +90°
Horizontal speed (variable): From 0.1°/s to 200°/s
Tilt speed (variable): From 0.1°/s to 200°/s
Preset accuracy: 0.05°
Unit weight: 12.5kg (28lb) (13kg / 28.7lb with LED
illuminator)
15.3 Electrical/Video
Power supply/Current consumption:
- 230Vac, 0.4A, 50/60Hz
- 24Vac, 4A, 50/60Hz
- 120Vac, 0.8A, 50/60Hz
Power consumption:
- 40W: P&T stopped, heating switched off
- 60W: P&T in motion, heating switched off
- 125W: peak at start-up, heating switched on
Input cables size: AWG 16-19
Dimensions of signal cables: AWG 16-30
Video line: coaxial cable (1Vpp, 75Ohm)
Functions: Autopan, Preset, Patrol, Tour (maximum 3),
Autoflip
Maximum number of presets for protocol
- AMERICAN DYNAMICS: 95*
- ERNITEC: 250
- PANASONIC: 250
- PELCO D: 99*
- VIDEOTEC MACRO: 250
*250, from OSD only (*250 from OSD (On Screen Display) only)
16-characters string for zone and preset titling
I/O alarm card
- Alarm inputs: 6
- Relay outputs: 2 (2A, 30Vac/60Vdc max)
ULISSE COMPACT with LED illuminator:
- Power consumption (with LED illuminator on):
15W
- 10° or 30° beam pattern for 36x and 28x camera
- 30° beam pattern for 18x and 10x cameras
- Number of LEDs: 9
- Wavelength: 850nm, 940nm, white light
- Built-in sensor for self-lighting, through external
photocell or from control keyboard
- The camera and the light beam are factory
aligned
- The pre-installed illuminator does not slow down
the P&T’s rotation speed