Videotec ULISSE COMPACT - Manual (Page 30)

EN - English - I
nstruc
tions manual
30 MNVCUCZ_1351_EN
9.1.6 Configuring the system
The screens for configuring the product are
illustrated below.
9.1.7 Main menu
From the main menu it is possible to enter menus for
configuring the device.
MAIN MENU
------------------------
1>LANGUAGE >
2 CAMERA >
3 MOTION >
4 DISPLAY SETUP >
5 OPTIONS >
6 DEFAULT >
7 INFO >
Fig. 49
9.1.8 Language
This menu is used to select and set the desired
language.
LANGUAGE MENU
------------------------
1>ITALIANO
2 ENGLISH OK
3 FRANCAIS
4 DEUTSCH
Fig. 50
9.1.9 Camera menu
1. Configuration: Sets one of the default
configurations for the SONY module:
• Standard: Sets the standard operating mode
for the camera.
• Low Light: Sets the operating mode for dimly
lit environments.
• Far Mode: Sets the operating mode for large
areas. It enables the proportional zoom and
the digital zoom.
• Custom: Signals that the user has manually
selected the parameters of the camera.
2. Area titling: Allows access to the area titling
submenu.
3. Masking: Allows access to the dynamic masking
submenu.
4. Advanced: Allows access to the advanced
settings submenu of the SONY module.
CAMERA
------------------------
1>CONFIG.: STANDARD
2 ZONE TITLING >
3 MASKING >
4 ADVANCED >
Fig. 51