Videotec ULISSE COMPACT - Manual (Page 34)

EN - English - I
nstruc
tions manual
34 MNVCUCZ_1351_EN
9.1.9.7 Advanced Setting Menu
This menu is used to configure the SONY module.
1. Zoom: Allows access to the Zoom submenu.
ADVANCED
------------------------
1>ZOOM >
2 FOCUS >
3 EXPOSURE >
4 INFRARED >
5 WHITE BALANCE >
6 OTHER >
Fig. 62
9.1.9.8 Advanced Setting Menu (Zoom)
1. Zoom Speed: Sets the speed of the zoom. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Digital Zoom: Enables the digital zoom.
ZOOM
------------------------
1>ZOOM SPEED : 7
2 DIGITAL ZOOM : N
Fig. 63
9.1.9.9 Advanced Setting Menu (Focus)
Once inside the menu it is possibile to set the
following parameters:
1. Focus Speed: Sets the speed of the Focus. The
speed ranges between 0 (minimum speed) and
7 (maximum speed).
2. Autofocus: Enables or disables the autofocus.
When on, it is to automatically load Autofocus
at any positioning or movement of the zoom,
depending on the selected operating mode.
3. Autofocus Type: Sets the type of Autofocus. The
possible values are:
• Normal: Autofocus is always enabled.
• Interval: The autofocus function is loaded at
regular intervals. The Interval is set every 5
seconds.
• Trigger: Autofocus is loaded at every PTZ
movement. This is the recommended
solution.
4. Sensitivity: Sets the level of sensitivity. The
possible values are:
• Normal: Focusing at the highest possible
speed. This is the recommended solution.
• Low: Slowed-down focusing. It is useful in
case of dim lighting as it makes the image
more stable.
FOCUS
------------------------
1>FOCUS SPEED : 2
2 AUTOFOCUS : N
3 AUTOFOCUS TYPE:TRIGGER
4 SENSITIVITY : NORMAL
Fig. 64