beautypg.com

Removing the switch cover – Acer 2930 User Manual

Page 67

background image

Chapter 3

57

Removing the Switch Cover

CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is

recommended that only fingers are used to remove the Switch Cover.

1. See “Removing the Battery Pack” on page 44.

2. Locate and remove the two securing screws as shown.

3. Turn the computer over and open the LCD module to expose the Switch Cover.

4. Pry the right corner up and partially lift up. Do not pull the Switch Cover completely off at this time.

IMPORTANT:Do not remove both sides of the Switch Cover together to prevent damage to the cover. Instead

lift one end first and follow the instructions as directed.

Step

Size

Quantity

Screw Type

Switch Cover

M2.5*5

2