Replacing the finger print reader, Replacing the upper cover – Acer 2930 User Manual

Page 121

Chapter 3

111

Replacing the Finger Print Reader

NOTE: Carefully insert the FFC cable ends fully into the connector. Take care to line up the cable square with

the connector before securing the FFC connector latch.

Replacing the Upper Cover

1. Tilt the Upper cover and insert the left side of the cover into place.

2. Lower the casing into place and ensure that the I/O board FFC passes through the casing.

1. Replace the Finger Print Reader board in the upper cover.

2. Align the bracket and replace over the board.

3. Replace the single securing screw.