Acer 2930 - Manual (Page 42)

32 Chapter 2
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter Description Submenu Items
Advanced CPU
Control Enter the Advanced CPU Control menu. • P-States (IST)
• Boot performance mode
• Thermal Mode
• CMP Support
• Use XD capability
• VT Support
• SMRR Support
• C-States
• Enhanced C-States
• C-State Pop Up Mode
• C-State Pop Down Mode
• C4 Exit Timing Mode
• DeepC4
• Hard C4E
• Enable C6
• EMTTM
• Bi-directional PROCHOT#
• Dynamic FSB Switching
• Turbo Mode
• ACPI 3.0 T-States
• DTS
• DTS Calibration
• Thermal Trip Points Setting (Fan
On Temp., Throttle On Temp.)
Platform Power
management Enter the Platform Power Management
menu. • PCI Clock Run
• _CST - C4 Latency Value
• C4 on C3 - Deeper Sleep
ACPI S3 Enable or Disable ACPI S1/S3 Sleep State N/A
Wake on PME Enable or Disable wake up when the
system power is off and a PCI Power
Management Enable wake up event occurs. N/A
Wake on Modem
Ring Enable or Disable wake up when the
system power is off and a modem attached
to the serial port is ringing. N/A
Auto wake on S5 Disable or Enable auto wake up by date
and time or at a fixed time everyday. N/A
Quickly S4
Resume Disable or Enable optional quick boot from
S4 Resume. N/A