Red Lion C48T - Manual (Page 17)

There are several ways to limit the programming of parameters from the front
panel keypad. The Accessible Value parameter is used with the Program Disable
plug jumper and an external programmable User Input selected for
Pro.dis to
limit programming. To enter the programming mode, a code number may need
to be entered, depending on the Program Disable Setting. Front Panel Function
Key F1 cannot be selected for program disable. The following table describes
the possible program disabling functions.
-11-
Front Panel Accessible Functions With Program Disable
PGM.DIS.
JUMPER
USER INPUT TERMINAL
PROGRAM CODE
NUMBER
PROTECTED VALUE
MENU
OPERATOR ACCESS AT
MAIN DISPLAY
PROGRAM
DISABLE LEVEL
PROGRAMMING
ENABLED
OFF (EN)
INACTIVE or Not
Programmed for Pro.dis
ALL No
All displayed values
changeable
None Yes
OFF (EN) ACTIVE 0 No
Per Access Privileges
programmed
Level 1 No
OFF (EN) ACTIVE 1 to 99
Yes
W/code
Per Access Privileges
programmed
Level 1 No
OFF (EN) ACTIVE 100 to 199 No
Per Access Privileges
programmed
Level 1
Yes
W/code
ON (DIS)
INACTIVE or Not
Programmed for Pro.dis
0 No
Per Access Privileges
programmed
Level 1 No
ON (DIS)
INACTIVE or Not
Programmed for Pro.dis
1 to 99
Yes
W/code
Per Access Privileges
programmed
Level 1 No
ON (DIS)
INACTIVE or Not
Programmed for Pro.dis
100 to 199 No
Per Access Privileges
programmed
Level 1
Yes
W/code
ON (DIS) ACTIVE ALL No Viewable only Level 2 No
C48t-im.QXD 3/5/04 3:28 PM Page 11