Vaisala HMT330 - Manual (Page 149)

Chapter 5 ___________________________________________________________________ Modbus
VAISALA _______________________________________________________________________ 147
b. If you are using the WLAN interface, use the WLAN
command to configure the network name (SSID) and security
settings. For example:
>wlan
Network SSID : NAME ? NETWORKID
Type : OPEN ? WPA-PSK/TKIP
WPA-PSK phrase ? thequickbrownfox
Save changes (Y/N) ? y
OK
>
For a description of the available settings, see section
Wireless LAN Configuration on page 86.
8. The Modbus configuration is now complete. Reset or power cycle
the transmitter to enable the Modbus mode, and proceed with the
installation of the transmitter.
Diagnostic Modbus Counters
HMT330 has diagnostic counters that can be used to pinpoint Modbus
problems. The counters are always active when the Modbus protocol is
enabled.
Viewing Counters Using Display/Keypad
You can use the display/keypad option to view and clear the counters.
Enter the Main Menu and navigate to
System ► Diagnostics
► MODBUS Counters.
1101-037
Figure 74 Modbus Counters