Vaisala HMT330 - Manual (Page 102)

User's Guide _______________________________________________________________________
100 __________________________________________________________________ M210566EN-K
General Settings
Changing Quantities and Units
To change quantities and units use serial commands or the optional
display/keypad. See Table 3 on page 19 for available quantities and
Table 4 on page 19 for optional quantities.
NOTE Only the quantities selected when ordering the device can be selected as
display output quantities.
Using Display/Keypad
Use display/keypad to select the display output quantities.
1. Press any of the arrow buttons to open the Main Menu.
2. Press the
► arrow button to select Display.
3. Press
► arrow button to select Quantities.
4. Select the quantity by using the
▲▼ arrow buttons. Confirm the
selection by pressing SELECT. You can select 1 ... 4 display
quantities at a time.
5. Press EXIT to return to the basic display.
To select display units:
1. Press any of the arrow buttons to open the Main Menu.
2. Press the
► arrow button to select Display.
3. Use the
▲▼arrow buttons to select Units. Confirm the selection
by pressing the right-hand arrow button.
4. Use the
▲▼ arrow buttons to select display units. Confirm the
selection by pressing CHANGE. The unit changes from metric to
non-metric or the other way round.
5. Press EXIT to return to the basic display.
NOTE Changing the display quantities/units (by using the display/keypad) has
no effect on the serial output data.