Vaisala HMT330 - Manual (Page 110)

User's Guide _______________________________________________________________________
108 __________________________________________________________________ M210566EN-K
Example (enable standard filtering):
>filt on
Filter : ON
>
Device Information
Use the display/keypad or the serial line to display the device
information.
Press the INFO button in the basic display to see the following
information:
- Current sensor operation (for example, chemical purge), if any, in
progress
- Present or past unacknowledged errors, if any
- Device information
- Current date and time (only shown if data logger module installed)
- Adjustment information fed by the user
- Measuring settings
- Information on chemical purge settings (when applicable)
- Display Alarm settings
- Serial interface information
- Network settings and status of the LAN and WLAN interfaces
- Analog output information
- Relay output information (when applicable)
1103-064
Figure 61 Device Information on Display
Proceed in the information views by pressing the MORE button
repeatedly until you get the desired information. You can browse through
the information displays also with arrow buttons. Press OK to return to
the basic display.