Specifications, Electrical and mechanical specifications, Environmental specifications – Outback Power Systems FLEXmax Extreme Owners Manual User Manual
Page 65
900-0150-01-00 Rev A
63
Specifications
Electrical and Mechanical Specifications
Table 8
Electrical and Mechanical Specifications for Model FM Extreme-150VDC
Specification Value
Maximum Continuous Output Current
80 amps
Maximum Input Current (short-circuit)
64 amps
Nominal Battery System Voltage
12, 24, 36, 48 or 60 Vdc (adjustable)
PV Open-Circuit Voltage
145 Vdc temperature corrected V
oc
(operational maximum)
Operating Voltage Range
Low
10.5 Vdc (lowest battery voltage for functionality)
High
150 Vdc (highest open-circuit voltage before equipment damage)
Standby Power Consumption
Less than 1 watt typical
Charge Cycle
Three-stage
Minimum Battery Bank Size
100 Ah
Charging (Output) Range
13 to 80 Vdc
Temperature Compensation
Adjustable from 2 mV/cell/°C to 6 mV/cell/°C
Remote Interface
RJ45 modular connector (CAT 5 8-wire cable)
Conduit Openings
Front, rear, sides (plugs inserted)
Dimensions (H x W x D)
18.56” x 8.8” x 6.0” (47.1 cm x 20.9 cm x 15.2 cm)
Shipping Dimensions (D x W X L)
9.69” x 11.75” x 22.0” (24.6 cm x 29.8 cm x 55.9 cm)
Weight
21.0 lb (9.5 kg)
Shipping Weight
21.5 lb (9.7 kg)
Environmental Specifications
Table 9
Environmental Specifications for Model FM Extreme-150VDC
Specification Value
Operating Temperature Range
Ambient -20°C to 45°C (-4°F to 113°F)
Output Power Temperature Derating
Ambient 45°C to 60°C (113°F to 140°F)
Ingress Protection Rating
IP 54
Enclosure Type
NEMA 3R
Maximum Altitude Rating
10,000 ft