Outback Power Systems FLEXmax Extreme Owners Manual - Manual (Page 54)

MATE/MATE2 Screens
52 900-0150-01-00 Rev A
SETPT Screens
Figure 53 SETPT Screens
Navigation for STATUS/CC/SETPT
 returns to the CC/PAGE1 screen.
 moves to the next menu item in the
diagram.
 moves to the previous menu item in the
diagram.
 returns to the first CC/SETPT screen for the
port shown.
 directs the MATE to read the next device
(port) on the HUB.
Charge Controller SETPT (set point) Screens
The SETPT screens display the current settings for
the FLEXmax Extreme battery charger, as described
on page 71.
 Absorb
 Float
STATUS/CC/SETPT----P00
end of set point
menu
UP TOP STATUS
STATUS----------------
choose device
FX CC DC MAIN
MAIN------------------
1:35:04p
SUM STATUS SETUP ADV
STATUS/CC/PAGE1
MODE METER SETPT PG2
STATUS/CC/SETPT----P00
absorb 14.4 Vdc
DOWN STATUS PORT
STATUS/CC/SETPT----P00
float 13.6 Vdc
DOWN UP TOP PORT