Outback Power Systems FLEXmax Extreme Owners Manual - Manual (Page 56)

MATE/MATE2 Screens
54 900-0150-01-00 Rev A
STAT Screens
Figure 55 STAT Screens
Navigation for STATUS/CC/STAT
 returns to the CC/PAGE2 screen.
 moves to the next menu item in the diagram.
 moves to the previous menu item in the diagram.
 returns to the CC/STAT/PAGE2 screen for the port
shown, with the exception of the “end of the cc stats”
menu. From the “end” menu, the soft key returns to
the 1
st CC/STAT screen.
 directs the MATE to read the next device (port) on
the HUB.
STATUS/CC/STAT----
P00
end of cc stats menu
STATUS--------------
--
choose device
MAIN----------------
--
1:35:04p
STATUS/CC/PAGE1
MODE METER SETPT
STATUS/CC/PAGE2-----
--
STATUS/CC/STAT-----
P00 maximum battery
15.1 Vdc
DOWN UP
STATUS/CC/STAT-----
P00 voc
21.0 vdc
STATUS/CC/STAT-----
P00 max voc
21.0 vdc
STATUS/CC/STAT-----
P00 maximum wattage
400 W
DOWN UP TOP
STATUS/CC/STAT-----
P00
total kWH DC
307
STATUS/CC/STAT-----
P00 total kAH
25.6
DOWN UP TOP
Charge Controller Stats
The STAT screens contain historical data, including peak voltages,
peak wattage, and total accumulations. These statistics include
the same information shown in the Charge Controller Stats
screen of the MATE3. See page 31 for descriptions.
 maximum battery Vdc: the highest voltage observed to date
 voc: the current open-circuit voltage
 max voc: the highest V
oc
observed to date
 maximum wattage: the highest wattage observed to date
 total kWH DC: the total accumulated kilowatt-hours to date
 total kAH: the total accumulated kiloamp-hours to date