Ag Leader PFadvantage Cotton Yield Monitor Operators Manual - Manual (Page 78)

PFadvantage Cotton Yield Monitor
Fields and Loads Ag Leader Technology
September 2005 4-2
Recommendations All the information recorded by the PFadvantage Cotton Yield Monitor
must be recorded in a field and load. The field and load that the monitor is
set on is found on the top line of the main operating screen.
Fields
You should at least create all the fields and name them before you begin to
use the PFadvantage Cotton Yield Monitor. You can create and name your
fields using any operating mode. You should choose field names that you
can use year after year. If you have multiple cotton monitors harvesting in
the same field, setup the same field names with the same field number. This
will simplify merging yield data into one map from multiple machines.
Loads
You can also create and name loads within fields before you use the
PFadvantage Cotton Yield Monitor. New loads can be created on-the-fly.
Load numbers do not have to match between monitors of multiple machines
in the field.
Definition:
Load: A load is used to subdivide a field into smaller sections. The
monitor load is not associated with the picker basket, wagon, or truck load.
Load
Field