Ag Leader PFadvantage Cotton Yield Monitor Operators Manual - Manual (Page 13)

PFadvantage Cotton Yield Monitor
Ag Leader Technology Setup Overview
September 2005 2-1
Important Notices The PFadvantage Cotton Yield Monitor must be set up before field
operation, but before you begin the setup procedures, read the following
notices:
•
The PFadvantage Cotton Yield Monitor is a software upgradeable
monitor. Ag Leader Technology will periodically offer free operating
program upgrades to increase the capabilities of the PFadvantage Cotton
Yield Monitor. To receive the program upgrade, you must send in
the registration form found at the beginning of the Operator’s
Manual.
•
If you plan to make yield maps on your own computer, you will need to
use a mapping program that can process data from the PFadvantage
Cotton Yield Monitor. Memory cards can be ordered through your Ag
Leader Technology dealer.
Section Contents This setup section contains instructions for the following items. The
operating modes that the instructions pertain to are also listed.
Item Page
Console Setup 2-3
Vehicle Setup 2-5
Cal Set Setup (see calibration section)
Card Setup 2-10
Swath Setup 2-15
Marker Setup 2-17
Creating, Naming Fields & Loads (1
st
& 2
nd
Pick) 2-19
Memory Setup 2-24
Sensor Setup 2-26
Using Power
Supply The PFadvantage Cotton Yield Monitor console does not need to be in the
vehicle to set it up. You can use the provided power supply (plugs into 120v
outlet) to power up the console inside your home or shop.