HP Surestore NAS - Manual (Page 90)

B-4 The Config.ini File
Note ❏ The parameter names marked with an asterisks (*) denote items
that must be configured to allow the HP CD-ROM Server to be
installed within the NDS tree.
❏ The parameter TimeZone has the permissible values shown in
the table on the following page.
NDSServerContext* =
Context in the NDS Tree where you wish to install
the server.
NDSAdminName* =
Name of user or administrator with Supervisor or
Create rights in the context where you want to install
the server.
NDSAdminPassword* =
Password for the administrator defined in
NDSAdminName. Once written into the
configuration file, the password will not be shown,
but replaced with *’s, representing each letter of the
Password.
NDSInstall* = no
Change to ‘yes’ when you are ready to install the
server in NDS.
TimeSyncSources = SAP
Default is SAP for the network agreed time.
Alternatively, enter the server names to be
contacted for time synchronization.
[END]
Parameter name Default Value Description
hp.book Page 4 Thursday, April 2, 1998 4:33 PM