beautypg.com

HP Surestore NAS User Manual

Page 89

background image

The Config.ini File B-3

SetCommunityName

= pass

Specifies the community that has read-write access
to all supported SNMP objects except read only
objects. It corresponds to the writeCommunity
SNMP object.

TrapDestination

= 0.0.0.0

Specifies the Internet Address which SNMP traps
are sent to. It corresponds to the trapAddress SNMP
object. Default is 0.0.0.0, i.e. all SNMP traps are
disabled.

TrapCommunityName

= public

Specifies the community for all generated SNMP
traps. It corresponds to the trapCommunity SNMP
object.

SystemContact

=

Optional entry which should be in plain text and may
be used to show the name of the system contact
person.

SystemName

=

Optional entry which should be in plain text and may
be used to show the name of the location of the
system.

SystemLocation

=

Optional entry which should be in plain text and may
be used to show the name of the location of the
system.

AuthenticationTrap

= disabled

Enables or disables the SNMP authentication failure
traps. It corresponds to the
snmpenableAuthenTraps (MIB-II) SNMP object.

[NetWare]

NWEnable

= yes

Enable or disable NetWare support.

Frame_802.2

= auto

Enable or disable the 802.2 frame type.

Frame_802.3

= auto

Enable or disable the 802.3 frame type

Frame_EthernetII

= auto

Enable/disable the Ethernet II frame type

Frame_SNAP

= auto

Enable or disable the SNAP frame type.

ServerName

= HPhhhhhh_NW

NetWare server name to be presented to the
NetWare clients, where hhhhhh are the last 6 digits
of the LAN hardware address.

InternalNetAddress

=xx-xx-xx-xx

Internal network address.

BurstMode

= on

Burst mode enable.

BinderyEnable

= Yes

Enables/Disables bindery mode login. Set to disable
to increasing system security when using NDS. The
supervisor will always be able to login in bindery
mode even if this parameter is set to no.

SupervisorPassword

= PASS

Supervisors Password.

BindAuthentication

=

Server Name.

NDSEnable*

= Yes

Enable/Disable NDS

NDSTreeName*

=

Name of the Tree you wish to install the server into.

Parameter name

Default Value

Description

hp.book Page 3 Thursday, April 2, 1998 4:33 PM