HP Surestore NAS - Manual (Page 57)

CD-ROM Server Configuration 5-1
5
CD-ROM Server Configuration
This chapter shows how to configure the HP CD-ROM Server.
The configuration can be made in the following ways:
• Using a Web browser . . . . . . . . . . . . . . . . . . . . . . . page 5-2
This is the easiest way and is supported by on-line help
instructions. However,this method requires that the
CD-ROM server be configured with an Internet (IP) address
on a TCP/IP network.
• Using a text editor . . . . . . . . . . . . . . . . . . . . . . . . . page 5-4
This tool can be used from any environment using your
favorite editor.
Note ❏ For Windows 95 and NT 4.0 systems, you can also configure
the HP CD-ROM Server using a software utility available
from HP’s Web site. For more information, visit the HP Web
site (refer to the front of this manual).
Through configuration changes, you can customize CD-ROM
server operation. For example, you can:
• Set up the SMB server name.
• Enable or disable CD-ROM server protocols, such as
NetWare, SMB on NetBIOS/NetBEUI, SMB on
NetBIOS/TCP/IP and NFS.
• Set up Internet and SNMP parameters.
• Set the JukeBoxLockTime parameter to prevent disc changer
flutter (see appendix A for more information).
Note ❏ Disc changer flutter may occur when one user requests
access to a CD-ROM while another user is reading data from
a different CD-ROM. The changer attempts to service both
requests by alternately accessing both CD-ROMs and
transferring small amounts of data from each. Because of
the time needed to swap discs, the data-transfer rate for
both users will be very low.
hp.book Page 1 Thursday, April 2, 1998 4:33 PM