HP Surestore NAS - Manual (Page 33)

Mounting or Mapping Network Drives 4-1
4
Mounting or Mapping Network Drives
If you are new to HP CD-ROM Servers, you should read the first
part of this chapter to learn about the file system and how to
access the CD-ROMs. Subsequently, proceed to the appropriate
section in this chapter depending on your operating environment
and client system:
• Novell NetWare (NCP) . . . . . . . . . . . . . . . . . . . . . . . page 4-6
(Clients: Windows 95, Windows NT, Windows for
Workgroups and DOS)
• Microsoft & IBM Networks (SMB). . . . . . . . . . . . . . page 4-12
(Clients: Windows 95, Windows NT, Windows for
Workgroups, OS/2 and DOS)
• UNIX (NFS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-21
• Web Browsers (HTTP) . . . . . . . . . . . . . . . . . . . . . . page 4-22
Note ❏ The appropriate network client and transport protocols must
be running on your computer. The following protocols are
supported:
• NCP (NetWare Control Protocol) over IPX
• SMB (Server Message Block) over NetBIOS/NetBEUI
• SMB over NetBIOS/TCP/IP
• NFS (Network File System) over UDP/IP.
• HTTP (HyperText Transfer Protocol) over TCP/IP for
access from a Web browser
❏ Refer to your Network Operating System manuals for
instructions.
hp.book Page 1 Thursday, April 2, 1998 4:33 PM