HP Surestore NAS - Manual (Page 73)

Security Management 6-11
Example 1:
Grant all NetWare users access:
Example 2:
Grant access to all users in the group ‘salesdep’ and to the user
‘Daryl’ who is not a member of ‘salesdep’:
Note ❏ You can always access the CD-ROM server using the user
name ‘supervisor’ and the password specified by the
parameter
SupervisorPassword . The factory default
password is pass .
Access Restrictions
in NetWare NDS
Access rights for users in bindery mode in NetWare is separate
from users accessing the CD-ROM server in NDS mode. For this
reason, we recommend that you disable bindery mode after you
have successfully installed the server in NDS, then allow users
to log on in NDS mode only.
To ensure that the CD-ROM server is visible to the NDS tree,
the configuration file should be modified as described in
“Installation as an NDS Server” in chapter 3.
Note ❏ If NDS mode is not functioning, you can always access the
CD-ROM in Bindery mode by logging in as supervisor. This
is true even if the parameter
BinderyEnable is set to no .
Default settings in
NetWare NDS
After installation, the default security rights will protect all the
configuration files. Only the CD-ROMs will be displayed to
users. The user rights to the CD-ROM server and its files and
directories are set up as follows:
• Supervisor rights to the SYS volume is inherited from the
Supervisor rights to the NDS Server object.
• Read and File Scan rights are inherited from the Browse
rights to the NDS Server object.
• By default, the config and volumes directories are setup with
an inherited-rights filter that filters all rights except the
Supervisor right. This protects all the configuration files.
Because the CD-ROM server acts as a normal NDS file server,
its NDS Security rights can be set using standard procedures.
NetWareUser/Group = *
NetWareUser/Group = salesdep
NetWareUser/Group = Daryl
hp.book Page 11 Thursday, April 2, 1998 4:33 PM