HP Color LaserJet 4600 Printer series User Manual
Page 164
150
ENWW
Setting saved
A menu selection has been saved.
No action necessary.
SIZE MISMATCH TRAY
XX=
press
V
alternates with
Ready For menus press
✔
The tray is loaded with media longer
or shorter in the feed direction than
the size configured for the tray.
1. Adjust the side and rear
media guides against
the paper.
2. If the media used is
Letter, A4, Executive,
B5 JIS, A5, or Legal
sized, the tray switch
should be set to
STANDARD. Set the
tray switch to CUSTOM
for all other media sizes.
The tray switch must be
set before the size can
be selected from the
control panel.
3. Reset the paper size in
the paper handling
menu.
Test terminated
A diagnostic test has been
terminated by pressing the
C
ANCEL
J
OB
button.
No action necessary.
TRAY XX CONTAINS
UNKNOWN MEDIA
The media type in the specified tray
cannot be determined.
1. To change media type,
press
✔
. Use
and
to highlight the type,
then press
✔
to select.
2. To change the media
size to Letter, A4,
Executive, B5 JIS, A5,
or Legal, leave the tray
switch in the
STANDARD position.
3. To change the media
size to other sizes,
move the tray switch to
CUSTOM, adjust the
paper guides against
the paper, and close the
tray.
4. Use
and
to
highlight the media size,
then press
✔
to select.
TRAY XX EMPTY (TYPE)
(SIZE)
alternates with
Ready For menus press
✔
The specified tray is empty and
needs to be filled but the current job
does not need this tray to print
correctly.
Refill the tray at a
convenient time.
Message
Description
Action