HP Color LaserJet 4600 Printer series - Manual (Page 153)

ENWW 139
INCORRECT SUPPLIES For
status press
✔
At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly
placed, out, or low. 1. Press
✔
and then press
V for help.
2. Follow the instructions
on the display to locate
and replace the
incorrect supply.
3. Press and to step
through the
instructions.
Initializing This message is displayed when the
printer is turned on, as soon as the
individual tasks begin initialization. No action necessary.
Initializing permanent
storage Displayed when the printer is turned
on to show that permanent storage is
being initiaized. No action necessary.
INSERT OR CLOSE TRAY
XX For help press
V
Tray XX must be inserted or closed
before the current job can be printed. 1. Press V for detailed
information.
2. Press and to step
through instructions.
INSTALL
CARTRIDGE
alternates with
For help press
V
The cartridge is either not installed or
not correctly installed in the printer. 1. Insert the cartridge or
make sure the cartridge
is fully seated.
2. Press V for detailed
information.
3. Press and to step
through the
instructions.
4. If the error persists,
contact HP Support.
INSTALL FUSER For help
press
V
The fuser is either not installed or not
correctly installed in the printer. 1. Insert the fuser or make
sure the installed fuser
is fully seated.
2. Press V for detailed
information.
3. Press and to step
through the
instructions.
4. If the error persists,
contact HP Support.
INSTALL SUPPLIES For
status press
✔
At least one supply item is missing or
is not correctly seated in the printer
and another supply item is missing,
incorrectly placed, out, or low. Insert
the supply item or make sure the
installed supply item is fully seated. 1. Press
✔
and then press
V for help.
2. Follow the instructions
on the display to locate
and replace the missing
or incorrect supply.
3. Press and to step
through the
instructions.
Message Description Action