HP Color LaserJet 4600 Printer series User Manual
Page 163
ENWW
149
REPLACE TRANSFER KIT
For help press
V
The transfer unit is at end of life.
1. Replace the identified
supply to continue
printing.
2. Press
V
for detailed
information.
3. Press
and
to step
through instructions.
4. Supplies ordering
information is also
available from the
embedded Web server.
See
for more information.
Request accepted
Please wait
The printer has accepted a request to
print an internal page, but the current
job must finish printing before the
internal page will print.
No action necessary.
Resend upgrade
The firmware upgrade was not
completed successfully.
Attempt upgrade again.
Resetting count
YES is selected in the Reset Supplies
menu, to reset the counts for any of
the supplies that cannot be detected
as new.
No action necessary.
Resetting factory
settings
The printer is restoring factory
settings.
No action necessary.
Restoring last saved
state
The printer is restoring the last saved
state.
No action necessary.
Rotating. . .
alienation motor To
exit press CANCEL JOB
The printer is executing a Component
Test and the component selected is
Alienation Motor.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Rotating belt drive To
exit press CANCEL JOB
The printer is executing a Component
Test and the component selected is
Belt Only.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Rotating
cartridge motor To
exit press CANCEL JOB
A component test is in progress; the
component selected is the
Cartridge motor.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Rotating. . .fuser
motor To exit press
CANCEL JOB
The printer is executing a Component
Test and the component selected is
Fuser Motor.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Rotating
Scanner To exit press
CANCEL JOB
A Scanner Test is in progress.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Rotating. . . transfer
motors To exit press
CANCEL JOB
The printer is executing a Component
Test and the component selected is
Transfer Motors.
Press
C
ANCEL
J
OB
when
ready to stop this test.
Saving current state
The current state is being saved.
No action necessary.
Message
Description
Action