HP LaserJet 8000 Multifunction Printer series - Manual (Page 94)

Chapter 2 Printing Tasks 94
Selecting the Output Bin
How to Configure the Operating Modes
The network or printer administrator chooses the mode of operation through
an HP network configuration utility, such as HP JetAdmin or HP LaserJet
Utility. You will need to set up your printer driver to reflect the mode chosen by
the administrator.
Bidirectional Environment
The printer automatically selects the mode established by the network
administrator.
Nonbidirectional Environment
You can change the mode in the driver. The method for changing the mode
varies with driver and by operating system. Refer to your driver’s online help.
The printer control panel will display different messages depending on the
mailbox used and which mode you are using. See the printer software help for
more information.
Stacking This mode stacks the printed output from the lowest bin to the top,
regardless of job boundaries. This mode of operation takes
advantage of the total capacity of the mailbox bins. The device is
seen by the software as one logical bin.
Modes (continued)