HP LaserJet 8000 Multifunction Printer series - Manual (Page 101)

Chapter 2 Printing Tasks 101
Using the Stapler
Selecting the Stapler from the Control Panel
If your software does not support stapling, set it using the directions below.
1. Press M ENUS repeatedly until PAPER HANDLING appears.
2. Press I TEMS repeatedly until PAPER DEST= STANDARD OUT BIN * appears.
3. Press + repeatedly until PAPER DEST= OPTIONAL BIN x appears. (See pages 95
and 96 to choose the appropriate bin according to the mode you are using.)
Your network administrator may have changed the name of this bin. For example, it
may be called
STAPLER .
4. Press S ELECT * to save your choice. An asterisk (*) appears next to your selection.