HP LaserJet 8000 Multifunction Printer series - Manual (Page 172)

Chapter 5 Problem Solving 172
Understanding Printer Messages
FINISHER LOW ON
FINISHING AGENT The finishing device is running out of its finishing material and
needs to be refilled.
FLASH DEVICE
FAILURE The flash DIMM had a critical failure and no longer can be used.
Remove the flash DIMM and replace it with a new one.
FLASH FILE
OPERATION FAILED The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
FLASH FILE
SYSTEM IS FULL Delete files from the flash DIMM. Download or delete files from
HP JetAdmin, and download or delete fonts from HP FontSmart.
(See the software help for more information.)
FLASH IS
WRITE PROTECTED The flash DIMM is protected, and no new files can be written to it.
Disable the write protection through HP JetAdmin.
INPUT DEVICE
CONDITION xx.yy An input paper handling device has a condition that needs attention
before printing can resume.
See the documentation that came with the paper handling device for
assistance.
LOADING
PROGRAM
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the printer’s file system. At
bootup time these entities are loaded into RAM. (These entities can
take a long time to load into RAM depending on the size and number
of entities being loaded.) The
specifies a sequence number
indicating the current program being loaded.
Printer Messages (continued)
Message Explanation or Recommended Action