Stapling documents, Selecting the stapler through the software – HP LaserJet 8000 Multifunction Printer series User Manual
Page 100
Chapter 2
Printing Tasks
100
Using the Stapler
Stapling Documents
The stapler can staple documents of 2 to a maximum of 20 pages on 16 to
28 lb paper, Letter, Legal, and A4 size only. For paper beyond 20 lb, fewer
sheets can be stapled depending upon the weight of the paper. The stapler
should not be set as the default output bin. If your job is only one page, or if it
is greater than 20 pages, the printer will print your job to the bin, but it will not
be stapled. The stapler bin can hold up to 350 stapled sheets. To have your job
stapled, send it to
OPTIONAL BIN x
. See pages
and
appropriate bin according to the mode you are using.
Selecting the Stapler through the Software
You can select the stapler through your software application or printer driver.
This is the recommended method for stapling. If you are unable to designate
the paper destination in your software or printer driver, follow the instructions
below for setting the overall default printer output bin selection. Where and
how you make selections depends on your software application or associated
printer driver. (Some options may only be available through the printer driver.
See page
for more information on accessing the printer driver.)