HP LaserJet 8000 Multifunction Printer series - Manual (Page 178)

Chapter 5 Problem Solving 178
Understanding Printer Messages
20 INSUFFICIENT
MEMORY
alternates with
PRESS GO TO
CONTINUE
The printer received more data than can fit in its available memory.
You might have tried to transfer too many macros, soft fonts, or
complex graphics.
Press
G O to print the transferred data (some data might be lost),
then simplify the print job or install additional memory (page 310 ).
21 PAGE TOO
COMPLEX
alternates with
PRESS GO TO
CONTINUE
The data (dense text, rules, raster or vector graphics) sent to the
printer was too complex.
Press
G O to print the transferred data. (Some data might be lost.)
To print the job without losing data, from the Configuration Menu in
the printer control panel, set
PAGE PROTECT=ON , print the job, and
then return PAGE PROTECT=AUTO . (See page 295 .) Do not leave PAGE
PROTECT=ON ; it might degrade performance.
If this message appears often, simplify the print job.
22 EIO x
BUFFER OVERFLOW
alternates with
PRESS GO TO
CONTINUE
Too much data was sent to the EIO card in the specified slot (
x
). An
improper communications protocol may be in use.
Press
G O to clear the message. (Data will be lost.)
Check the host configuration. If this message persists, contact an
HP-authorized service or support provider. (See the
HP Support
pages at the front of this user’s guide.)
Printer Messages (continued)
Message Explanation or Recommended Action