Envelopes, Envelope construction – HP LaserJet 8000 Multifunction Printer series User Manual
Page 267
Appendix A Specifications
267
Paper Specifications
Envelopes
Note
For best results, use the Left Output Bin.
Envelope Construction
Envelope construction is critical. Envelope fold lines can vary considerably, not
only between manufacturers, but also within a box from the same
manufacturer. Successful printing on envelopes depends upon the quality of
the envelopes. When selecting envelopes, consider the following components:
z
Weight: See page
for supported envelope weight.
z
Construction: Prior to printing, envelopes should lie flat with less than
0.25 inch (6 mm) curl, and should not contain air. (Envelopes that trap air
may cause problems.)
z
Condition: Make sure envelopes are not wrinkled, nicked, or otherwise
damaged.
z
Sizes in Tray 1: See page
for supported paper sizes.
z
Sizes in the optional envelope feeder: From 3.5 by 6.3 inches (90 by 160
millimeters) to 7 by 10 inches (178 by 254 millimeters).
Continued on next page.