HP StorageWorks 2500 Disk System - Manual (Page 85)

When viewed from the rear of the enclosure, I/O Module A (01.) is on the right, and I/O Module
B (02.) is on the left.
• ec is the error code.
Table 31 I/O module error conditions
Error
condition
Severity Description Actions
8.7.en.01 Critical The Fibre Channel link speed for the
I/O module en is not supported.
8.7.en.02 Critical I/O module en is unable to
communicate with the EMU.
8.7.en.10 Noncritical I/O module en NVRAM read error
8.7.en.11 Noncritical I/O module NVRAM en write error
8.7.en.12 Noncritical I/O module en NVRAM read error
8.7.en.13 Noncritical I/O module en has been removed.
Contact your HP-authorized
service representative.
2500 Disk System user guide 85