HP StorageWorks 2500 Disk System - Manual (Page 28)

CXO8195A
Figure 12 Engaging the scissor-type locking latches
3. Slide the back end of the rack rail into the inside rear column of the rack, making sure that the
pins extend through the U-holes marked in Step 1 , and the scissor-type locking latch is fully
engaged ( Figure 13 ).
CXO8196A
Figure 13 Inserting the rail into the rear rack column
4. Locate the shipping bracket on the rail ( Figure 14 ).
5. Use a No. 2 Phillips screwdriver to loosen the shipping bracket and slide the bracket toward
the back of the rack.
6. Install the other rail by repeating Step 1 through Step 5 .
28 Installation