HP StorageWorks 2500 Disk System - Manual (Page 30)

1
2
25205a
Figure 15 Drive blank
Removing the power supply/blower assemblies
To remove a power supply/blower assembly:
1. Lift the mounting latch ( Figure 16 -2), grasp the blower and pull the power supply/blower assembly
out of the enclosure.
2. Place the power/supply blower assembly on an antistatic work space.
1. Power cord lock
2. Mounting latch
3. Blower
Figure 16 Removing a power supply/blower assembly
Removing the EMU
To remove the EMU:
1. Grasp the EMU handle Figure 17 -1) and taking care not to tilt it, pull the EMU module straight
out of the enclosure ( Figure 17 -2).
2. Place the EMU on an antistatic surface.
30 Installation