HP StorageWorks XP Remote Web Console Software - Manual (Page 74)

Table 17 Errors during Volume Migration or Migration Cancellation by using RAID Manager
(continued)
Measure Cause Error Code
(SSB2)
Error Code
(SSB1)
This migration plan cannot be deleted.
The migration cannot be canceled.
Check the configuration definition file. The migration source volume is not
paired with the migration target volume.
The following operations cannot be
performed:
•
Volume migration
•
Deleting migration plan
• Cancelling migration
Check the configuration definition file.
The migration source volume and the
migration target volume are set to the
same volume. 2351
This volume migration cannot be
executed. Check the configuration
definition file. The setting of VLL is different between the
migration target volume and the
migration source volume. 2355
Release the Compatible XRC pair, and
then perform the volume migration. The migration source volume is a primary
volume of Compatible XRC. 2362
Release the Compatible XRC pair, and
then perform the volume migration. The migration target volume is a primary
volume of Compatible XRC. 2363
Release the IBM 3990 Concurrent Copy
pair, and then perform the volume
migration. The migration source volume is a primary
volume of IBM 3990 Concurrent Copy
(CC). 2365
Release the IBM 3990 Concurrent Copy
pair, and then perform the volume
migration. The migration target volume is a primary
volume of IBM 3990 Concurrent Copy. 2366
Perform the following measures for each
cause:
1. Change the XP Continuous Access
pair status from COPY to PAIR or
PSUS, or delete the XP Continuous
Access pair, and then migrate the
volume.
2. Change the XP Continuous Access
Asynchronous pair status from COPY
or PAIR to PSUS, or delete the XP
Continuous Access Asynchronous
pair, and then migrate the volume.
The specified migration source volume
is in one of the following statuses:
1. The volume is being used as the
primary volume of the XP Continuous
Access pair. The pair is in the COPY
status.
2. The volume is being used as the
primary volume of the XP Continuous
Access Asynchronous pair. The pair
is in the COPY or PAIR status.
2368
Perform the following measures for each
cause:
1. Change the XP Continuous Access
pair status from COPY to PAIR or
PSUS, or delete the XP Continuous
Access pair, and then migrate the
volume.
2. Change the XP Continuous Access
Asynchronous pair status from COPY
or PAIR to PSUS, or delete the XP
Continuous Access Asynchronous
pair, and then migrate the volume.
The specified migration source volume
is in one of the following statuses:
1. The volume is being used as the
secondary volume of the XP
Continuous Access pair. The pair is
in the COPY status.
2. The volume is being used as the
secondary volume of the XP
Continuous Access Asynchronous
pair. The pair is in the COPY or PAIR
status.
2369
Perform the volume migration after the
XP Business Copy pair is changed to the
SPLIT status. The migration source volume is the
primary volume of an XP Business Copy
pair that is in the SP-PEND status. 236A
236B
74 Troubleshooting