HP Business Inkjet 1000 Printer - Manual (Page 63)

Printer lights reference 60
The Power light is on and the
Resume light blinks. The printer is out of paper.
• Load paper and then press the
(resume button).
The printer is in manual duplex mode. It is
waiting for the ink to dry so the pages can
be flipped over and reloaded.
• Reload the stack into the printer and
press the
(resume button).
The printer is pausing for the ink to dry.
• Wait for the ink to dry. The Resume light
will stop blinking.
The printer has printed a banner,
and the banner needs to be removed
from the printer.
• Press the (resume button) to remove
the banner from the printer.
The rear-access panel or the optional
auto-duplex unit is not installed. The printer
cannot print without it installed.
• Install the rear-access panel or the
optional auto-duplex unit, and then
press the
(resume button).
The Power light and Resume
light blink. Print media is jammed in the printer.
• Press the (resume button) to eject the
jammed media.
• Remove all media from the output tray.
Open the top cover to locate the jam.
After clearing the jam, press the
(resume button) to continue the
print job.
The Power light blinks and the
Resume light is on. One or more covers on the printer
are open.
• Close any open covers.
• Make sure the auto-duplex unit is
properly installed.
A printer error has occurred.
• Turn the printer off and then on again.
The Power light blinks and
the Printhead and Resume light
are on. The printhead latch is not secured.
• Open the printing supplies cover and
secure the printhead latch.
The Printhead light, a color
indicator light, and the Resume
light are on. One or more of the printheads
needs attention.
• Reinstall the printheads and try to print.
• Try cleaning the printhead contacts.
See
Cleaning the printhead contacts .
• If the error persists, replace the
printhead or printheads indicated.
The Ink Cartridge light, a color
indicator light, and the Resume
light are on. One or more of the ink cartridges
needs attention.
• Reinstall the ink cartridges and try
to print.
• If the error persists, replace the ink
cartridge or cartridges indicated.
Light pattern Light description Explanation and recommended action