HP OmniBook 5000 Notebook PC - Manual (Page 63)

62
3. Insert a ballpoint pen tip or other slender object into the small opening on the left
side of the computer below the ac adapter socket. Push in momentarily—the system
resets and reboots. (See the previous topic if the system reboots improperly.)
Reset button
If the reset button has no effect, remove the battery and ac adapter and press the reset
button—then install the battery or plug in the ac adapter and try pressing the reset
button again.
Upgrading the OmniBook
You can upgrade or add to the OmniBook system by changing or installing certain
components. This section shows how to
♦ Find your system software version and amount of memory.
♦ Replace drive C.
To find the system software version and memory size
1. In Program Manager, double-click the OmniBook Tools icon (in the Main group).
2. In the window’s Control menu, choose About.
The software version and amount of memory are displayed in the information dialog
box.
Finding System Information
Click Start and HP User Tools, then on the Advanced tab click OmniBook System
Information.
The system software version is also displayed when the OmniBook reboots.
To add memory to the OmniBook, see “Adding Memory to the OmniBook” .
Finding System
Information