HP OmniBook 5000 Notebook PC - Manual (Page 50)

49
4. Unscrew and remove the slot cover next to the card slot you want to use.
5. Slide the ISA card firmly into the connector and replace the slot cover screw.
6. Replace the shield.
7. Replace the cable cover.
8. Plug in the ac adapter and dock the OmniBook.
9. Install the software for the card.
Installing an ISA Card
If you install a network card or other ISA card in a docking system ISA slot, and it’s not a
Plug and Play card, follow these suggestions:
•
If the card isn’t detected, in Control Panel double-click Add New Hardware.
•
If you don’t want Windows to reconfigure the card each time you dock your
OmniBook, you can run the ISA Configuration utility. Click Start, Programs, Plug
And Play, ISA Configuration Utility.